Zephyr V6-30L VIN 1 (2006) Engine Control Module TSB: Various Driveability/A/T Concerns
Engine Control Module: All Technical Service Bulletins
Engine, A/T Controls - Various Driveability/A/T Concerns
TSB 07-2-3
02/05/07
VARIOUS DRIVEABILITY/TRANSMISSION
SYMPTOMS - PCM/TCM CALIBRATION UPDATES -
3.0L - AISIN F21 AUTO TRANS
FORD:
2006-2007 Fusion
LINCOLN:
2006 Zephyr
MERCURY:
2006-2007 Milan
This article supersedes TSB 06-21-11 to update the TSB Action step.
ISSUE
Some 2006-2007 Fusion, Milan and 2006 Zephyr vehicles built before 9/4/2006 equipped with a 3.0L engine and Aisin F21 automatic transmission may
exhibit one or more of the driveability and/or transmission symptoms listed below.
Engine Driveability
^
Diagnostic trouble code (DTC) P0606
^
Powertrain lacks response
^
High idles after starting engine and lasting about 2 minutes
^
Intermittent hard to start
Transmission
^
Transmission shifts too early / too late / too often
^
Gear changes take too long to complete
^
Shifts rough or jerky from park
^
Slow downshifts
^
Takes too long to engage and/or hesitates while shifting from Park to Drive or Reverse
ACTION
Reprogram the powertrain control module (PCM) and transmission control module (TCM) to the latest calibration using IDS release IDS 46.10 and
higher or IDS 47.1 and higher. This new calibration is not included in the VCM 2007.1 DVD. Calibration files may also be obtained at the website.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage
OPERATION
DESCRIPTION
TIME
070203A
2006-2007 Fusion/Milan,
0.6 Hr.
2006 Zephyr 3.0L: Check
DTCs And Reprogram The
PCM And The TCM (Do
Not Use With 12650D)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
RECALEM
04
