Zephyr V6-3.0L VIN 1 (2006)
4. If equipped, remove the 7 screws and the underbody cover.
5. Disconnect the evaporative emission (EVAP) tube-to-throttle body quick connect coupling.
6. Disconnect the EVAP tube-to-EVAP purge valve quick connect coupling.
7. Disconnect the EVAP test port-to-EVAP purge valve quick connect coupling.
8. Disconnect the EVAP tube quick connect coupling-to-EVAP test port.
9. Remove the 2 nuts and the upper cowl heat shield.
-
To install, tighten to 9 Nm (80 lb-in).
10. Remove the 2 nuts and the lower cowl shield.
-
To install, tighten to 9 Nm (80 lb-in).
