Zephyr V6-3.0L VIN 1 (2006)
1. Remove the rear seat cushion.
2. Remove the bolt and safety belt retractor anchor.
-
To install, tighten to 48 Nm (35 lb-ft).
3. Remove the parcel shelf.
4. Remove the bolt and center safety belt retractor.
-
To install, tighten to 40 Nm (30 lb-ft).
5. NOTE: Make sure the safety belt webbing is not twisted prior to installation.
To install, reverse the removal procedure.
6. Check the active restraint system for correct operation.
