Zephyr V6-3.0L VIN 1 (2006)
View 2 Of 2
Removal and Installation
1. Remove the battery tray.
2. Remove the bolt, nut and the battery hold down bracket.
-
To install, tighten to 10 Nm (89 lb-in).
3. Remove the bolt and position the battery cable body ground terminal aside.
-
To install, tighten to 12 Nm (9 lb-ft).
4. Remove the nut and position the BJB cable terminal aside.
-
To install, tighten to 8 Nm (71 lb-in).
