Zephyr V6-3.0L VIN 1 (2006)
Steering Wheel: Service and Repair
Steering Wheel
Steering Wheel
Steering Wheel
Removal and Installation
1. Position the steering wheel in the straight-ahead position and turn the ignition switch to the OFF position.
^
Remove the key.
2. Remove the driver air bag module. For additional information, refer to Air Bag Systems.
3. NOTE: Mark the steering wheel and column shaft for reference during installation.
Remove the steering wheel nut.
^
To install, tighten to 35 Nm (26 ft. lbs.).
4. Disconnect the steering wheel switches electrical connector.
5. CAUTION: Do not remove the steering wheel by hitting the shaft with a hammer. Damage to the column can occur.
Using a suitable puller, remove the steering wheel.
6. To install, reverse the removal procedure.
^
Align the steering wheel using the reference mark.