Zephyr V6-3.0L VIN 1 (2006)
Control Arm: Service and Repair
Rear
Upper Arm
Upper Arm
Upper Arm
Removal and Installation
CAUTION: Suspension fasteners are critical parts because they affect performance of vital parts and systems and their failure can result in major
service expense. A new part with the same part number must be installed if installation becomes necessary. Do not use a replacement part of lesser
quality or substitute design. Torque values must be used as specified during reassembly to make sure of correct retention of these parts.
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove and discard the shock absorber lower bolt and flag nut.
^
To install, tighten to 115 Nm (85 ft. lbs.) with the suspension at the bushing fastener tightening position.