Zephyr V6-3.0L VIN 1 (2006)
Part 2
Removal
All bushings
1. Remove the rear subframe.
Front bushings
2. NOTE: Care must be used when removing the bushings from the subframe with a flat-blade screwdriver.
Remove the rear subframe front lower bushings with a flat-blade screwdriver.
3. Turn the subframe over.
4. Remove the rear subframe front upper bushings with a flat-blade screwdriver.
Rear bushings
5. Remove the rear subframe lower bushings with a flat-blade screwdriver.
6. Turn the subframe over.
7. Remove the rear subframe upper bushings with a flat-blade screwdriver.
Installation
Front bushings
1. NOTE: The bushings must be installed with the correct orientation or increased noise and vibration may result.
Assemble the special tools to the rear subframe with the new front bushings. The upper and lower bushings are installed at the same time.
2. Align the left front bushings to the rear subframe.
1
Align the left upper bushing.
2
Align left lower bushing.