Zephyr V6-3.0L VIN 1 (2006)
1. Position the transmission fluid cooler tubes in place and install the retainer.
2. Install the transmission fluid cooler tubes in the retainers.
3. NOTE: The power steering hose is routed between the 2 transmission fluid cooler hoses.
Position the transmission fluid cooler hoses in place.
4. CAUTION: Use care not to over stretch or extend the hose clamps.
CAUTION: The hose clamps are held on the hose with a special epoxy. Damage may occur to the hose if the clamp is removed from the hose. If
the clamp or hose is damaged, replace the entire fluid cooler tube.
