3 L4-2.0L (2007)
Vehicle Lifting: Service and Repair
JACKING POSITIONS, VEHICLE LIFT (2 SUPPORTS) AND SAFETY STAND (RIGID RACK) POSITIONS
Jacking Positions
WARNING: Improperly jacking a vehicle is dangerous. The vehicle can slip oft the jack and cause serious injury. Use only the correct front
and rear jacking points and block the wheels.
-
Use safety stands to support the vehicle after it has been lifted.
Front
NOTE: To prevent obstruction between the jack body and front bumper when the jack body is inserted, use a low-floor type jack.
-
Near the center of the front crossmember.
Rear
CAUTION: Place a board (approx. 20 mm (0.78 in) thick) between the rear crossmember and the jack to prevent damage to the crossmember.
-
At the center of the rear crossmember.
Vehicle Lift Positions
Front and rear
WARNING: Unstably lifting a vehicle is dangerous. The vehicle can slip oft the lift and cause serious injury and/or vehicle damage. Make sure
that the vehicle is on the lift horizontally by adjusting the height of support at the end of the arm of the lift.
