3 L4-2.0L (2007)
2. Except for California emission regulation applicable model with LF ATX
Circuit Open/Short Inspection
1. Disconnect the PCM connector.
2. Inspect the following wiring harness for open or short circuit (continuity check).
Open circuit
-
If there is no continuity, there is an open circuit. Repair or replace the wiring harness.
-
EVAP system leak detection pump terminal C and PCM terminal 1V*1,1AJ*2
-
EVAP system leak detection pump terminal D and PCM terminal 1U*1 1AF:*2
-
EVAP system leak detection pump terminal A and main relay terminal A
-
EVAP system leak detection pump terminal B and the body ground
Short circuit
-
If there is continuity, there is a short circuit. Repair or replace the wiring harness.
-
EVAP system leak detection pump terminal A and the body ground
-
EVAP system leak detection pump terminal B and power supply
-
EVAP system leak detection pump terminal C and power supply
-
EVAP system leak detection pump terminal D and power supply
1. California emission regulation applicable model and except for California emission regulation applicable model with LF MTX, L3
2. Except for California emission regulation applicable model with LF ATX
