3 L4-2.0L (2007)
Shift Interlock Switch: Testing and Inspection
EMERGENCY OVERRIDE BUTTON INSPECTION
1. Turn the ignition switch to the LOCK position.
2. Verify that the selector lever is in the P position.
3. Without the brake pedal depressed, verify that the selector lever cannot be shifted from the P position.
4. Remove the panel cover using a screwdriver as shown in the figure.
5. Insert the screwdriver into the emergency override hole and push it down. Verify that the selector lever can be shifted from the P position. If there
is any malfunction, replace the selector lever component.