3 L4-2.3L (2004)
Headlamp Alignment Switch: Service and Repair
HEADLIGHT LEVELING SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Detach the hood release lever from the lower panel. (See HOOD LATCH REMOVAL/INSTALLATION.)
3. Remove the front scuff plate. (Driver's side)
4. Remove the front side trim. (Driver's side)
5. Remove the lower panel.
6. Remove the headlight leveling switch
7. Disconnect the headlight leveling switch connector.
8. Install in the reverse order of removal.
