mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0106 Set|Page 3111 > < Engine Controls - MIL ON/DTC P0106 Set|Page 3105
Page 1
background image

Absolute Pressure Sensor: All Technical Service Bulletins
Engine Controls - MIL ON/DTC P0106 Set

TSB: 01-044/06

MULTI-MODEL - MIL ON WITH DTC P0106

APPLICABLE MODEL(S)/VINS

2004-2006 Mazda3 vehicles with VINS lower than JM1BK******545535 (produced before June 1, 2006)

2006 Mazda5 vehicles with VINS lower than JM1CR******129154 (produced before June 1, 2006)

2006 Mazda MX-5 vehicles with VINs lower than JM1NC******119712 (produced before June 1, 2006)

2003-2006 Mazda6 vehicles with 2.3L produced before August 9, 2006

DESCRIPTION

On some vehicles, the MIL may come on with DTC P0106 (MAP sensor malfunction) stored in memory due to corrosion of the MAP sensor chip. This
produces a short circuit which causes the output characteristics of the MAP sensor to fall out of specification.

Customers having this concern should have their vehicle repaired using the following repair procedure.

REPAIR PROCEDURE

1.

Verify customer concern.

2.

Replace the MAP sensor with a modified one.

3.

Verify repair.

PART(S) INFORMATION

WARRANTY INFORMATION

NOTE:

^

This warranty information applies only to verified customer complaints on vehicles eligible for warranty repair. Refer to the Warranty Wizard for
warranty term information.

^

Additional diagnostic time cannot be claimed for this repair.

Engine Controls - MIL ON/DTC P0106 Set|Page 3111 > < Engine Controls - MIL ON/DTC P0106 Set|Page 3105