3 L4-2.3L (2004)
Vehicle Speed Sensor: Service and Repair
Vehicle Speed Sensor Removal/Installation (Without ABS)
VEHICLE SPEED SENSOR REMOVAL/INSTALLATION (WITHOUT ABS)
1. Disconnect the negative battery cable.
2. Remove the air cleaner component, battery and battery tray.
3. Disconnect the vehicle speed sensor connector.
4. Remove the vehicle speed sensor.
5. Apply transaxle oil to a new O-ring and install it on a new vehicle speed sensor.
6. Install the vehicle speed sensor.
Tightening torque 7.9 - 11.2 Nm (80 - 115 kgf-cm, 69.5 - 99.8 inch lbs.)
7. Connect the vehicle speed sensor connector.
8. Install the battery and battery tray.
9. Connect the negative battery cable.
