3 L4-2.3L (2004)
Windshield Washer Switch: Service and Repair
WIPER AND WASHER SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
1. Front scuff plate (Driver's side)
2. Front side trim (Driver's side)
3. Hood release lever (See HOOD LATCH REMOVAL/INSTALLATION.)
4. Lower panel
5. Column cover
3. Disconnect the wiper and washer switch connector.
4. Remove the screws, then remove the wiper and washer switch.
5. Install in the reverse order of removal.
