mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Antenna Feeder No.1 Removal/Installation|Page 6103 > < Antenna Feeder No.1 Inspection|Page 6100
Page 1
background image

Antenna Cable: Service and Repair
Antenna Feeder No.1 Removal/Installation

ANTENNA FEEDER NO.1 REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts: 

a. Front scuff plate  See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate Removal/Installation

b. Front side trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Front Side Trim Removal/Installation

c. Upper panel  See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Upper Panel Removal/Installation

d. Shift lever knob (MTX)  See: Transmission and Drivetrain/Manual Transmission/Transaxle/Shifter M/T/Service and Repair

e. Selector lever knob (ATX)  See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and Repair/Automatic

Transaxle Shift Mechanism Removal/Installation

f.

Shift panel  See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Shift Panel Removal/Installation

g. Side wall  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and Replacement/Side

Wall Removal/Installation

h. Console  See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Console Removal/Installation

i.

Shift lever component (MTX) (See  See: Transmission and Drivetrain/Manual Transmission/Transaxle/Shifter M/T/Service and Repair)

j.

Selector lever component (ATX)  See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and
Repair/Automatic Transaxle Shift Mechanism Removal/Installation

k. Glove compartment  See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair

l.

Hood release lever  See: Body and Frame/Doors, Hood and Trunk/Hood/Hood Latch Release/Service and Repair

m. Lower panel  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and

Replacement/Lower Panel Removal/Installation

n. Center panel  See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and

Replacement/Center Panel Removal/Installation

o. Audio unit  See: Radio, Stereo, and Compact Disc/Service and Repair/Removal and Replacement/Audio Unit Removal/Installation

p. Climate control unit  See: Heating and Air Conditioning/Control Assembly/Service and Repair/Climate Control Unit Removal/Installation -

Full-Auto Air Conditioner  See: Heating and Air Conditioning/Control Assembly/Service and Repair/Climate Control Unit
Removal/Installation - Manual Air Conditioner

q. A-pillar trim (RH)  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/A-Pillar Trim Removal/Installation

r.

Auto light/wiper control module (with auto light/wiper system)  See: Lighting and Horns/Headlamp/Headlamp Control Module/Service and
Repair/Auto Light/Wiper Control Module Removal/Installation

3. Partially peel back the hook.

Antenna Feeder No.1 Removal/Installation|Page 6103 > < Antenna Feeder No.1 Inspection|Page 6100