mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Antenna Feeder No.1 Removal/Installation|Page 6109 > < Antenna Feeder No.1 Removal/Installation|Page 6107
Page 1
background image

Antenna Cable: Service and Repair
Antenna Feeder No.3 Removal/Installation

ANTENNA FEEDER NO.3 REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts: 

a. Sunroof seaming welt (vehicles with sunroof)

b. A-pillar trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/A-Pillar Trim Removal/Installation

c. Front scuff plate  See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate Removal/Installation

d. Rear scuff plate  See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Rear Scuff Plate Removal/Installation

e. B-pillar lower trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Lower Trim Removal/Installation

f.

Upper anchor of the front seat belt  See: Restraint Systems/Seat Belt Systems/Seat Belt/Service and Repair/Front Seat Belt
Removal/Installation

g. B-pillar upper trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Upper Trim Removal/Installation

h. Rear seat cushion  See: Body and Frame/Seats/Seat Cushion/Service and Repair/Rear Seat Cushion Removal/Installation

i.

Tire house trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Tire House Trim Removal/Installation

j.

Trunk side upper trim  

k. C-pillar trim  See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/C-Pillar Trim Removal/Installation

l.

Map light  See: Lighting and Horns/Map Light/Service and Repair/Map Light Removal/Installation

m. Sunvisor  See: Body and Frame/Interior Moulding / Trim/Sun Visor/Service and Repair

n. Assist handle  See: Body and Frame/Interior Moulding / Trim/Passenger Assist Handle/Service and Repair

o. Headliner  See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair

3. Partially peel back the headliner.

4. Disconnect the connector.

5. Remove the clips A and B.

Antenna Feeder No.1 Removal/Installation|Page 6109 > < Antenna Feeder No.1 Removal/Installation|Page 6107