3 L4-2.5L (2010)
5. Apply battery positive voltage to steering switch terminal O, and connect terminal E to ground.
6. Verify that the LED illuminates.
-
If the LED does not illuminate, replace the steering switch.
With Bluetooth System
1. Disconnect the negative battery cable and wait for 1 min or more.
2. Remove the driver-side air bag module. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Driver-Side Air Bag Module Removal/Installation
3. Disconnect the steering switch connector.
4. Verify the resistance between the steering switch terminals.
