3 L4-2.5L (2010)
Cowl Moulding / Trim: Service and Repair
Cowl Panel Removal/Installation
COWL PANEL REMOVAL/INSTALLATION
1. Remove the windshield wiper arm and blade. (See See: Wiper and Washer Systems/Wiper Arm/Service and Repair/Windshield Wiper Arm And
Blade Removal/Installation)
2. Remove the front fender molding. (See See: Cowl Grille Removal/Installation)
3. Remove the cowl grille. (See See: Cowl Grille Removal/Installation)
4. Remove the washer hose grommet from the cowl panel and disconnect the front washer hose.
5. Remove the windshield wiper motor. (See See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Removal and
Replacement/Windshield Wiper Motor Removal/Installation)
6. Remove the bolts A and bolt B.
7. Remove the cowl panel in the direction of the arrow shown in the figure.
