3 L4-2.5L (2010)
Rear Door Window Motor: Service and Repair
POWER WINDOW MOTOR REMOVAL/INSTALLATION
Rear Power Window Motor
1. Fully lower the rear door glass.
2. Disconnect the negative battery cable.
3. Remove the rear door trim. See: Rear Door Panel/Service and Repair/Removal and Replacement
4. Remove the rear door speaker. See: Accessories and Optional Equipment/Radio, Stereo, and Compact Disc/Speaker/Service and Repair/Rear
Door Speaker Removal/Installation
5. Remove the bolts.
6. Disconnect the power window motor connector.
7. Install in the reverse order of removal.
NOTE:
-
When installing the rear power window motor to the rear power window regulator drum, the drum housing hooks may detach from the door
module. If this happens, remove the door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and while
supporting the drum housing, install the rear power window motor to the drum.