3 L4-2.5L (2010)
Fuel Door Release Cable: Service and Repair
Fuel-Filler Lid Opener And Lever Removal/Installation
FUEL-FILLER LID OPENER AND LEVER REMOVAL/INSTALLATION
Fuel-filler Lid Opener
4SD
1. Open the fuel-filler lid.
2. Remove the following parts:
a. Trunk end trim See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Trunk End Trim Removal/Installation
b. Trunk side trim (RH)
3. Remove the nut.
4. Remove the lift spring.
5. Pull out the fuel-filler lid opener in the direction of the arrow (1).
