3 L4-2.5L (2010)
9. Install in the reverse order of removal.
5HB
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Front seat (LH) See: Seats/Service and Repair/Removal and Replacement
b. Front scuff plate (LH) See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate Removal/Installation
c. Rear scuff plate See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Rear Scuff Plate Removal/Installation
d. B-pillar lower trim See: Interior Moulding / Trim/Trim Panel/Service and Repair/B-Pillar Lower Trim Removal/Installation
e. Rear seat cushion See: Seats/Seat Cushion/Service and Repair/Rear Seat Cushion Removal/Installation
f.
Rear seat back See: Seats/Service and Repair/Overhaul/Rear Seat Back Removal/Installation
g. Tire house trim See: Interior Moulding / Trim/Trim Panel/Service and Repair/Tire House Trim Removal/Installation
h. Trunk side upper trim (RH)
i.
Trunk end trim See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Trunk End Trim Removal/Installation
j.
Trunk side trim (RH)
k. Fuel-filler lid opener See: Fuel-Filler Lid Opener And Lever Removal/Installation
l.
Fuel-filler lid opener lever See: Fuel-Filler Lid Opener And Lever Removal/Installation
3. Remove the blots and nut.
