3 L4-2.5L (2010)
Trunk / Liftgate Latch: Testing and Inspection
Trunk Lid Latch Switch Inspection
TRUNK LID LATCH SWITCH INSPECTION
1. Disconnect the negative battery cable.
2. Remove the trunk lid trim.
3. Remove the trunk lid latch and lock actuator. See: Power Trunk / Liftgate Lock Actuator/Service and Repair
4. Press the latch in using a flathead screwdriver to inspect the latch lever condition.
5. Verify that the continuity is as indicated in the table.
-
If not as indicated in the table, replace the trunk lid latch and release actuator
