3 L4-2.5L (2010)
Trunk / Liftgate Shock / Support: Service and Repair
Trunk Lid Stay Damper Disposal
TRUNK LID STAY DAMPER DISPOSAL
NOTE:
-
The gas in the trunk lid stay damper is colorless, odorless, and non-toxic.
1. Wear protective eye wear.
2. Lay the trunk lid stay damper flat.
3. Hacksaw 2-3 mm {0.08-0.11 in} into the trunk lid stay damper using a hacksaw, and allow the gas to escape from the trunk lid stay damper.
4. Verify that the gas has escaped from the trunk lid stay damper.
5. Discard the trunk lid stay damper.
