3 L4-2.5L (2010)
Trunk / Liftgate Striker: Service and Repair
Trunk Lid Lock Striker Removal/Installation
TRUNK LID LOCK STRIKER REMOVAL/INSTALLATION
1. Remove the trunk end trim. See: Interior Moulding / Trim/Scuff Plate/Service and Repair/Trunk End Trim Removal/Installation
2. Disconnect the trunk lid lock striker from the trunk lid opener cable.
3. Remove the bolts, then remove the trunk lid lock striker.
4. Install in the reverse order of removal.
5. Adjust the trunk lid lock striker. See: Adjustments/Trunk Lid Adjustment
