3 L4-2.5L (2010)
Console: Service and Repair
Shift Panel Removal/Installation
SHIFT PANEL REMOVAL/INSTALLATION
ATX
1. Remove the upper panel. See: Upper Panel Removal/Installation
2. Remove the selector lever knob. (See See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Shifter A/T/Service and
Repair/Automatic Transaxle Shift Mechanism Removal/Installation)
3. Pull the shift panel in the direction of the arrow shown in the figure and remove it while detaching the clips A, hook B and guides C.
4. Pull the shift panel in the direction of the arrow (1), (2), (3) while remove the hooks D, E and guide F.