3 L4-2.5L (2010)
6. Disconnect the switch connector.
7. Disconnect the push button start connector.
8. Install in the reverse order of removal.
Passenger-side
1. Remove the following parts:
a. Passenger-side front scuff plate See: Scuff Plate/Service and Repair/Front Scuff Plate Removal/Installation
b. Passenger-side front side trim See: Trim Panel/Service and Repair/Front Side Trim Removal/Installation
c. Dashboard under cover See: Dashboard Under Cover Removal/Installation
d. Grove compartment See: Glove Compartment/Service and Repair
2. Partially peel back the seaming welt.
3. Remove the screws.