3 L4-2.5L (2010)
4SD
1. Remove the rear seat cushion. See: Seats/Seat Cushion/Service and Repair/Rear Seat Cushion Removal/Installation
2. Remove the rear scuff plate. See: Scuff Plate/Service and Repair/Rear Scuff Plate Removal/Installation
3. Partially peel back the seaming welt.
4. Remove the fastener.
5. Pull the tire house trim in the direction of arrow shown in the figure while remove the clip A, pin B and C.
6. Pull the tire house trim in the direction of arrow shown in the figure while remove the hook D.