3 L4-2.5L (2010)
1
Select "DataLogger".
2
Select "Modules".
3
Select "RKE".
-
When using the PDS (Pocket PC)
1
Select "Module Tests".
2
Select "RKE".
3
Select "DataLogger".
3. Select the applicable PID from the PID table. See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Testing and
Inspection/Pinout Values and Diagnostic Parameters/PID/Data Monitor Table/Immobilizer System (Advanced Keyless Entry And Push Button
Start System)
4. Verify the PID data according to the directions on the screen.
NOTE:
-
The PID data screen function is used for monitoring the calculated value of input/output signals in the module. Therefore, if the monitored value of
the output parts is not within the specification, it is necessary to inspect the monitored value of input parts corresponding to the applicable output
part control. In addition, because the system does not display an output part malfunction as an abnormality in the monitored value, it is necessary
to inspect the output parts individually.
Advanced Keyless Entry And Push Button Start System
PID/DATA MONITOR TABLE [ADVANCED KEYLESS ENTRY AND PUSH BUTTON START SYSTEM]