3 L4-2.5L (2010)
Power Mirror Switch: Testing and Inspection
POWER OUTER MIRROR SWITCH INSPECTION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Inner garnish See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and Replacement/Inner Garnish
Removal/Installation
b. Front door trim See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Removal and Replacement/Front Door
Trim Removal/Installation
c. Switch panel See: Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Overhaul
3. Verify that the continuity between the power outer mirror switch terminals is as indicated in the table.
-
If not as indicated in the table, replace the power outer mirror switch.