3 L4-2.5L (2010)
Caliper and Brake Hose Removal Note
1. Remove the caliper and brake hose from the vehicle as a single unit.
Brake Hose Installation Note
1. Secure the caliper to the vise and install the brake hose to it.
CAUTION:
-
Insert a protective plate into the vise opening so as not to damage the caliper.
2. Tighten the brake hose to the specified torque.
Tightening torque
-
26-30 N-m {2.7-3.0 kgf-m, 20-22 ft-lbf}