3 L4-2.5L (2010)
Parking Brake Cable: Service and Repair
PARKING BRAKE CABLE REMOVAL/INSTALLATION
1. Remove the upper panel. See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Upper Panel Removal/Installation
2. Remove the under cover. See: Steering and Suspension/Suspension/Trailing Arm/Service and Repair
3. Remove the tunnel member (rear). (LF, L5) See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair
4. Remove the tunnel member. (L3 WITH TC) See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair
5. Remove the TWC. (LF, L5) See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair
6. Remove the presilencer. (L3 WITH TC) See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair
7. Remove the insulator (middle No.1) and the insulator (middle No.2). See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair See:
Engine, Cooling and Exhaust/Exhaust System/Service and Repair
8. Remove in the order indicated in the table.
9. Install in the reverse order of removal.
10. After installation, inspect the parking brake stroke and adjust if necessary. See: Parking Brake Lever/Testing and Inspection
