3 L4-2.5L (2010)
Vacuum Brake Booster Check Valve: Service and Repair
VACUUM HOSE REMOVAL/INSTALLATION [LF, L5]
1. Remove the battery and battery tray. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
2. Remove the vacuum hose from the vacuum hose clip.
3. Insert a thin flathead screwdriver at the point indicated by the arrow in the figure, push the ring down and disconnect the vacuum hose from the
intake manifold.
4. Move the vacuum hose as shown in the figure.
5. Disconnect the vacuum hose connector from the power brake unit while pressing the tabs of the vacuum hose connector.
