3 L4-2.5L (2010)
Cruise Control Switch: Testing and Inspection
CRUISE CONTROL SWITCH INSPECTION [LF, L5]
1. Remove the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
2. Disconnect the negative battery cable and wait for 1 min or more.
3. Remove the driver-side air bag module. See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and
Replacement/Driver-Side Air Bag Module Removal/Installation
4. Disconnect the cruise control switch connector.
5. Inspect for resistance and continuity between cruise control switch terminals K and M (part wiring harness-side) using a tester.
-
If not as specified, replace the steering switch. See: Accessories and Optional Equipment/Radio, Stereo, and Compact
Disc/Radio/Stereo/Remote Switch/Service and Repair
6. Apply battery positive voltage to cruise control switch connector terminal O (part wiring harness-side), and terminal E (part wiring harness-side) to
ground.