mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Before Service Precaution|Page 1588 > < Valve Clearance|System Diagnosis|Page 1583
Page 1
background image

Fuel Pressure Release: Service Precautions
Before Service Precaution

BEFORE SERVICE PRECAUTION [LF, L5]

WARNING:

-

Fuel vapor is hazardous. It can very easily ignite, causing serious injury and damage. Always keep sparks and flames away from fuel.

-

Fuel line spills and leakage from the pressurized fuel system are dangerous. Fuel can ignite and cause serious injury or death and damage. Fuel can
also irritate skin and eyes. To prevent this, always complete the "Fuel Line Safety Procedure".

-

A person charged with static electricity could cause a fire or explosion, resulting in death or serious injury. Before performing work on the fuel
system, discharge static electricity by touching the vehicle body.

Fuel Line Safety Procedure

1. Remove the battery cover.  See: Starting and Charging/Battery/Service and Repair/Removal and Replacement

2. Disconnect the negative battery cable.

3. Remove the fuel-filler cap to release the pressure inside the fuel tank.

4. Remove the fuel pump relay.

5. Connect the negative battery cable.  See: Starting and Charging/Battery/Service and Repair/Removal and Replacement

6. Start the engine.

7. After the engine stalls, crank the engine 3-4 times.

8. Switch the ignition to off.

9. Install the fuel pump relay.

Before Service Precaution|Page 1588 > < Valve Clearance|System Diagnosis|Page 1583