3 L4-2.5L (2010)
CAUTION:
-
Install the engine front cover upper blind plug before the applied silicone sealant starts to harden.
Tightening torque
-
8-11 Nm {82-117 kgf-cm, 71-101 in-lbf}
43. Install a new engine front cover lower blind plug.
Tightening torque
-
10-14 Nm {102-142 kgf-cm, 89-123 in-lbf}
44. Install the drive belt. (L5) See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
45. Install the generator drive belt. (LF) See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
46. Install the aerodynamic under cover No.2 and splash shield as a single unit. See: Body and Frame/Splash Guard/Service and Repair/Aerodynamic
Under Cover No.2 Removal/Installation See: Body and Frame/Splash Guard/Service and Repair/Splash Shield Removal/Installation
47. Install the cylinder head cover. See: Timing Components/Timing Chain/Service and Repair
48. Install the oil level gauge.
49. Install the ventilation hose.
50. Install the spark plugs. See: Spark Plug/Service and Repair
51. Install the ignition coils. See: Powertrain Management/Ignition System/Ignition Coil/Service and Repair
52. Connect the wiring harness.
53. Install the plug hole plate. See: Service and Repair/Removal and Replacement/Plug Hole Plate Removal/Installation
54. Connect the negative battery cable.
55. Install the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement