3 L4-2.5L (2010)
Instrument Cluster / Carrier: Removal and Replacement
INSTRUMENT CLUSTER REMOVAL/INSTALLATION
CAUTION:
-
When replacing the instrument cluster, the configuration procedure must be performed before removing the instrument cluster. Replacing the
instrument cluster without performing the configuration procedure will result in system malfunction.
1. Perform the instrument cluster configuration when replacing it. See: Testing and Inspection/Programming and Relearning
2. Disconnect the negative battery cable.
3. Remove the column cover. (upper) See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair
4. Remove the screws.
5. Pull the instrument cluster outward and remove it
6. Disconnect the connector.
