3 L4-2.5L (2010)
Center Mounted Brake Lamp Bulb: Service and Repair
HIGH-MOUNT BRAKE LIGHT BULB REMOVAL/INSTALLATION
4SD
1. Disconnect the negative battery cable.
2. Remove the trunk lid trim.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5HB
1. Disconnect the negative battery cable.
2. Remove the liftgate upper trim.
3. Remove the high-mount brake light. See: Service and Repair/Removal and Replacement
4. Remove in the order indicated in the table.
5. Install in the reverse order of removal.