mazda Workshop Repair Guides

Mazda Workshop Service and Repair Manuals

Wheels and Tires > < Relay Block Inspection - With Advanced Keyless Entry And Push Button Start System|Page 1473
Page 1
background image

Maintenance Required Lamp/Indicator: Technical Service Bulletins
Instruments - Service Reminder Reset Information

Bulletin No: 09-018/09

Last Issued: 03/20/2009

Subject:
DIFFICULTIES SETTING THE MID SERVICE REMINDER (SERVICE DUE)

APPLICABLE MODEL(S)/VINS
2010 Mazda3

DESCRIPTION

In order to set the service reminder, or "SERVICE DUE" as it appears in the MID display, the vehicle's clock must first be set. Therefore, vehicles with
navigation must first receive signals from GPS satellites in order for the clock to set. This means the vehicle must be parked outside away from tall
buildings and trees with an open view to the sky, and nothing blocking the GPS antenna located in the instrument cluster. It takes about two to five
minutes for the vehicle to receive a signal once in an open area. Once the time is displayed, the service reminder can be set.

WARRANTY INFORMATION

NOTE:

^ At PDI, setting the service reminder in the MID is part of PDI. 

^ Therefore, no additional time can be claimed.

^ During maintenance operation, setting the service reminder in the MID is part of the operation. Therefore, no additional time can be claimed.

Wheels and Tires > < Relay Block Inspection - With Advanced Keyless Entry And Push Button Start System|Page 1473