3 L4-2.5L (2010)
NOTE:
-
The chain tensioner rack is compressed using the chain tension generated by applying force to the exhaust camshaft in the direction of the
engine rotation.
e. Screw in the bolt set in Step 1 approx. 5 mm {0.2 in} and secure the tensioner arm with the rack compressed.
NOTE:
-
The racket has not been unlocked if the bolt cannot be pressed in approx. 5 mm {0.2 in}.
-
If the tensioner arm cannot be secured, return the bolt to its original position and repeat the procedure from Step 3.
19. Fix the exhaust camshaft using a wrench on the cast hexagon, and loosen the camshaft sprocket bolt.
20. Remove the exhaust camshaft sprocket bolt, exhaust camshaft sprocket, and washer as a single unit.
CAUTION:
-
Perform the work carefully so that the washer does not drop out.
