3 L4-2.5L (2010)
Throttle Body: Testing and Inspection
THROTTLE BODY INSPECTION [LF, L5]
Resistance Inspection
1. Remove the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
2. Disconnect the negative battery cable.
3. Disconnect the throttle body connector.
4. Measure the resistance between throttle body terminals E and F.
Throttle body resistance
-
0.3-100 ohms [20°C {68 °F}]
-
If not as specified, replace the throttle body. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
