3 L4-2.5L (2010)
Variable Induction Control Solenoid: Testing and Inspection
Variable Tumble Solenoid Valve Inspection
VARIABLE TUMBLE SOLENOID VALVE INSPECTION [LF, L5]
Airflow Inspection
1. Remove the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
2. Disconnect the negative battery cable.
3. Remove the variable tumble solenoid valve. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair
4. Inspect airflow between the ports under the following conditions.
Step 1-Step 2
-
If not as specified, replace the variable tumble solenoid valve. See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and Repair