3 L4-2.5L (2010)
Knock Sensor: Testing and Inspection
KNOCK SENSOR (KS) INSPECTION [LF, L5]
Resistance Inspection
1. Remove the battery cover. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
2. Disconnect the negative battery cable.
3. Disconnect the KS connector.
4. Measure the resistance between the KS terminals A and B using an ohmmeter.
-
If not as specified, replace the KS.
Specification
-
Approx. 4.63-5.11 megohms [ECT: 25 °C {77 °F}]