3 L4-2.5L (2010)
Headlamp Control Module: Service and Repair
Auto Light/Wiper Control Module Removal/Installation
AUTO LIGHT/WIPER CONTROL MODULE REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Passenger-side front scuff plate See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair/Front Scuff Plate
Removal/Installation
b. Passenger-side front side trim See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair/Front Side Trim
Removal/Installation
c. Dashboard under cover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Removal and
Replacement/Dashboard Under Cover Removal/Installation
d. Grove compartment See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
