3 L4-2.5L (2010)
WARNING:
-
Be sure not to crush the pipe on the side where it is cut. If it is crushed completely, the interior pressure of the pipe will build up and can cause
it to explode during air bag module operation (deployment).
6. Disconnect the curtain air bag module connector.
7. Connect the SST (Adapter harness) to the curtain air bag module as shown in the figure.
8. Secure the curtain air bag module to the tire, by wrapping a wire (cross section 1.25 mm2 {0.002 in2} or more) through the tire and the bolt
installation holes at least 4 times as shown in the figure.
WARNING:
-
If the air bag module is not properly installed to the tire, serious injury may occur when the module is operated (deployed). Make sure to install
the air bag module securely.
9. Stack the tire with the curtain air bag module on top of two tires without wheels. Stack a tire without a wheel on top of the tire with the curtain air
bag module, and then stack another tire with a wheel on the very top.
10. Secure the tires with wire.
