3 L4-2.5L (2010)
Air Bag: Removal and Replacement
Driver-Side Air Bag Module Removal/Installation
DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION
WARNING:
-
Handling the air bag module improperly can accidentally deploy the air bag module, which may seriously injure you. Read the air bag system
service warnings and cautions before handling the air bag module. See: Service Precautions/Air Bag System Service Warnings See: Service
Precautions/Air Bag System Service Cautions
-
Due to the adoption of 2-step deployment control in the driver-side air bag module, depending on the impact force, it is possible that inflator No.2
might not deploy. In such cases, before disposing of the air bag module, make sure to follow the inflator deployment procedures and verify
complete deployment of inflators No.1 and 2.
1. Switch the ignition to off.
2. Disconnect the negative battery cable and wait for 1 min or more.
3. Remove the covers.
4. Remove the bolts.
5. Using a flathead screwdriver, lift the locking device carefully, however do not remove it.
