3 L4-2.5L (2010)
2. Remove the ABS hole cover from the body.
Rear ABS Wheel-speed Sensor Wiring Harness Installation Note
1. Pass the rear ABS wheel-speed sensor wiring harness outside the rear parking brake cable as shown in the figure.
2. Install the rear ABS wheel-speed sensor wiring harness.
ABS Hole Cover Installation Note
1. Install the ABS hole cover into the body so that the arrow on it is facing toward the outer side of the vehicle.
Dynamic Stability Control
REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
1. Remove or install the rear ABS wheel-speed sensor in the same order of vehicles with ABS. See: