3 L4-2.5L (2010)
Backup Lamp Switch: Testing and Inspection
BACK-UP LIGHT SWITCH INSPECTION
1. Disconnect the negative battery cable.
2. Remove the battery and battery tray. See: Starting and Charging/Battery/Service and Repair/Removal and Replacement
3. Remove the under cover.
4. Drain the oil from the transaxle.
5. Remove the back-up light switch. See: Service and Repair/Back-Up Light Switch Removal/Installation [G35M-R] See: Service and
Repair/Back-Up Light Switch Removal/Installation [G66M-R]
6. Verify that the continuity between the back-up light switch terminals is as indicated in the table.
-
If not as indicated in the table, replace the back-up light switch.