3 L4-2.5L (2010)
Wiper Switch: Overhaul
COMBINATION SWITCH DISASSEMBLY/ASSEMBLY
CAUTION:
-
If the disc on the combination switch is deformed or has foreign material adhering to it, performance of the steering angle sensor may be reduced,
causing abnormal operation. Do not remove the clock spring except when replacing the combination switch.
1. Disconnect the negative battery cable and wait 1 min or more.
2. Remove the following parts:
a. Driver-side air bag module See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Driver-Side Air
Bag Module Removal/Installation
b. Steering wheel See: Steering and Suspension/Steering/Steering Column/Service and Repair/Steering Wheel And Column Removal/Installation
- Without Advanced Keyless Entry And Push Button Start System See: Steering and Suspension/Steering/Steering Column/Service and
Repair/Steering Wheel And Column Removal/Installation - With Advanced Keyless Entry And Push Button Start System
c. Column cover See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair
d. Clock spring See: Restraint Systems/Air Bag Systems/Clockspring Assembly / Spiral Cable/Service and Repair
e. Combination switch See: Sensors and Switches - Lighting and Horns/Combination Switch/Service and Repair/Removal and Replacement
3. Remove the screws shown in the figures, then pull the light switch, and the wiper and washer switch in the direction of the arrow respectively to
remove them.
4. Assemble in the reverse order of disassembly.
