3 L4-2.5L (2010)
Control Arm: Service and Repair
Rear Suspension - Lower Arm Removal/Installation
REAR LOWER ARM REMOVAL/INSTALLATION
1. Disconnect the rear auto leveling sensor link lower side. (Vehicles with AFS) See: Lighting and Horns/Headlamp/Headlamp Alignment
Sensor/Service and Repair
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
4. Inspect the wheel alignment and adjust it if necessary. See: Alignment/Service and Repair/Rear Wheel Alignment
Rear Lower Arm Removal Note [RH]
1. Remove the charcoal canister installation bolts (rear side), and push the charcoal canister up slightly.